Finger puppet Bunny. Use a non-fray fabric such as felt. Before stitching the final colour add the second layer of fabric beneath the hoop. (You will need matching bobbin thread for this colour.)
Travel tray for 200x200mm hoop (or larger) You'll find two files, one for the inside, one for the back. Stitch the back first and omit the last colour; then stitch the inside square and place the back right side down on top of the embroidered squa
FP goat in jef. Sorry posted pes twice and forgot jef.
Finger puppet Elephant Use a non-fray fabric such as felt. Add the second layer of fabric beneath the hoop before stitching the final colour. (You will need matching bobbin thread for this colour.) I used light grey on the dark background, if yo
Finger puppet lamb Use a non-fray fabric such as felt. Add the second layer of fabric beneath the hoop before stitching the final colour. (You will need matching bobbin thread for this colour.)
Finger puppet goat Use a non-fray fabric such as felt. Add the second layer of fabric beneath the hoop before stitching the final colour. (You will need matching bobbin thread for this colour.)
Panda finger puppet. I used a dark-grey non-fraying material, the flash is reflected in some of the fibers. The first colour is a placement line, the second attaches the material to the stabiliser, handy when you're using scraps otherwise skip
Finger puppet Owl Choose your own colour depending on the colour of your fabric. Use a non-fray fabric such as felt. Add the second layer of fabric beneath the hoop before stitching the final colour. (You will need matching bobbin thread for thi
Fingerpuppet Tiger Use a non-fray fabric such as felt. Add the second layer of fabric beneath the hoop before stitching the final colour. (You will need matching bobbin thread for this colour.)
ITH bunny for 4x4 hoop I placed the bunny on the diagonal to get the largest possible size in the 4x4 hoop. Colour 1 is the placement line, colour 5 stitches the back to the design - for both use the colour of your fabric. As always
Elephant glove puppet Kindly tested by quail - thank you! Colour 1 is a placement line Use a piece of material some 2" or 5 cm longer than the outline to lengthen the part the hand goes in. Colour 2 stitches the material to the stabi
Sheep/lamb glove puppet. I resized the design to the size of the others, changed the ears as they were a bit small and added some curls in the hair to give it some detail. The curls are a different colour so you can leave them out. As always
Tiger handpuppet As requested here's the tiger puppet that has roughly the same size as Sue's puppets - that's a bit smaller than the one in the picture. Hoop stabiliser place a piece of fabric on top with about 6cm extra along the botto
Oval doily for 150x360 mm hoop - as requested.
ITH bear - 150x240mm hoop - as requested I made 4 variations (see pictures 1-4) and upload them as one file (picture#5). Colours 1,2 and 3 are for the snout; ears and paws; and facial features. Now you have to make a choice: Colour#4